HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

Enter/Exit Programming Mode
10 Programming Reference Guide
3. If additional input parameters are needed, go to Appendix D, Keypad, and scan the appropriate characters
from the keypad.
4. Complete the programming sequence by scanning the ENTER/EXIT PROGRAMMING barcode to exit
Programming Mode.
For more detailed descriptions, programming information and examples for setting selected configuration
items, see References, starting on page 185.
Additional information about many features can be found in the “References” chapter.
If you make a mistake before the last character, scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the beginning.