HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

Scanning Features

Programming Reference Guide 209

Multiple Labels Ordering by Code Symbology

This feature Specifies the transmission ordering by symbology type, when Multiple Labels per Frame is

enabled.Up to six symbologies can be selected. Zeroes must be added to pad the string to 12 characters if not

using all six symbologies.

The labels are ordered first as specified in the output mask. Labels present in the volume but not specified will

be transmitted as unspecified symbologies in random order as allowed by the reading time sequence. For each

label decoded in the volume the reader signals the standard beeper and LED indications.

To specify the symbology order:

1. Determine the symbologies and order you want to specify.

2. Use Table 40 on page 210 to find the hex values for up to six symbologies.

3. Go to page 60 and scan the ENTER/EXIT PROGRAMMING MODE barcode to enter Programming

Mode.

4. Scan the barcode: “SELECT SYMBOLOGIES FOR MULTIPLE LABELS ORDERING”.

5. Scan the appropriate two alphanumeric characters from the keypad in Appendix D, Keypad, that repre-

sent the desired character/value in step 2 above.

6. Scan zeroes if needed to make a 12-character string.

7. When finished, scan the ENTER/EXIT PROGRAMMING MODE barcode to exit Programming Mode.

This completes the procedure. See Table 39 for some examples of how to set this feature.

Table 39. Multiple Labels Ordering by Code Symbology Examples

Table 40 on page 210 shows the hex value associated with each symbology.

STEP ACTION EXAMPLES

1 Desired symbology

Code 39 Data Matrix Code 128 Aztec

Hex equivalent from

ASCII

Chart

24 0E 0C 4E

3 Scan ENTER/EXIT PROGRAMMING MODE

Scan SELECT SYMBOLOGIES FOR MULTIPLE LABELS ORDERING

Scan Two Characters From

Appendix D, Keypad

‘2’ and ‘4’ ‘0’ and ‘E’ ‘0’ and ‘C’ ‘4’ and ‘E’

RESULT

0x240E0C4E0000

6 Scan ENTER/EXIT PROGRAMMING MODE