HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

Enter/Exit Programming Mode

Programming Reference Guide 17

ACK Character

This setting specifies an ASCII character or hex value to be used as the ACK character. ASCII characters or

any hex value from 0 to 0xFF can be selected. See page 187 for more information.

NAK Character

This setting specifies an ASCII character or hex value to be used as the NAK character. ASCII characters or

any hex value from 0 to 0xFF can be selected. See page 188 for more information.

ACK NAK Timeout Value

This option specifies the amount of time the reader waits for an ACK character from the host following label

transmission. The selectable timeout range is 200 milliseconds to 15,000ms (15 seconds) in 200ms increments.

A selection of 0 disables the timeout.

Select ACK Character Setting

Select NAK Character Setting

$CR2AC

DEFAULT

0x06 ‘ACK’ Character

$CR2NA

DEFAULT

0x15 ‘NAK’ Character