HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

Enter/Exit Programming Mode Label ID
36 Programming Reference Guide
Label ID
A Label ID is a customizable code of up to three ASCII characters (convert to Hex using the ASCII Chart on
the inside back cover of this manual), used to identify a barcode symbology type. It can be appended previous
to or following the transmitted barcode data depending upon how this option is enabled. This feature provides
options for configuring custom Label IDs or individually per symbology (see "Individually Set Label ID" on
page 37). If you wish to program the reader to always include an industry standard label identifier for ALL
symbology types, see the previous feature "Global AIM ID" on page 33.
See Label ID: Pre-loaded Sets, starting on page 197 of “References” for more information on setting this
feature.
Label ID: Pre-Loaded Sets
The reader supports two pre-loaded sets of Label IDs. See Label ID: Pre-loaded Sets, starting on page 197 for
details on the USA set and EU set.
CAUTION
When changing from one Label ID set to another, all other reader configuration settings,
including the host interface type, will be erased and set to the standard factory defaults.
Any custom configuration or custom defaults will be lost.
Label ID Pre-loaded Set = USA Set
Label ID Pre-loaded Set = EU Set
$AE(CR)
$Ae(CR)
DEFAULT