HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

Label ID Enter/Exit Programming Mode
Programming Reference Guide 37
Individually Set Label ID
This feature configures a Label ID individually for a single symbology. To set, first define whether you want it
as a prefix or suffix by scanning a label below. Then turn to Label ID Symbology Selection − 1D
Symbologies, starting on page 38 to select the symbology you want to set, followed by up to 3 characters from
the ASCII Chart at the back of this manual. See "Label ID: Set Individually Per Symbology" on page 200 for
detailed instructions on setting this feature.
Label ID Control
This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a given symbology type.
Label ID Transmission = Disable
Label ID Transmission = Enable as Prefix
Label ID Transmission = Enable as Suffix
DEFAULT
$CIDCO00(CR)
$CIDCO01(CR)
$CIDCO02(CR)