HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

Enter/Exit Programming Mode Label ID
44 Programming Reference Guide
Character Conversion
Character conversion is an eight byte configuration item. The eight bytes are 4 character pairs represented in
hexadecimal ASCII values. The first character in the pair is the character that will be converted. The second
character in the pair is the character to convert to. If the character to convert in a pair is FF, then no conversion
is done.
If less than the expected string of 16 characters are selected, scan the ENTER/EXIT barcode twice
to accept the selections and exit Programming Mode.
Configure Character Conversion
$CLFCH
DEFAULT
0xFFFFFFFFFFFFFFFF
(No character conversion)