HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

Enter/Exit Programming Mode
58 Programming Reference Guide
Partial Label Reading Control
Enable/Disable to ignore partial labels to be read within the boundary of the field of view.
Decode Negative Image
Enable/Disable the ability to decode a negative image for all symbologies. When this feature is enabled, you
will be unable to read normally-printed labels or programming labels in this manual. Scan the “Disable”
barcode below to return the scanner to its default for this feature. To set decoding for only 2D codes, go to "2D
Normal/Inverse Symbol Control" on page 155. For additional options, see the HP configuration application.
Partial Label Reading Control = Disable
Partial Label Reading Control = Enable
Unlike some programming features and options, Decode Negative Image selections require that
you scan only one programming barcode label. DO NOT scan an ENTER/EXIT barcode prior to scan-
ning a Decode Negative Image barcode.
CAUTION
When this feature is enabled, you will be unable to read other programming labels in this manual.
Decode Negative Image = Disable
Decode Negative Image = Enable
IPPL00
IPPL01
$P,CIPVR00,P(CR)
DEFAULT
$P,CIPVR01,P(CR)