HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

Enter/Exit Programming Mode
Programming Reference Guide 59
MULTIPLE LABEL READING
In standard (default) mode, when the reader’s aiming system is activated (by selecting the software trigger,
motion or other method depending on the mode), it then acquires and processes each image in the area in front
of it (the Volume). In this case, the scanner stops processing the image once it decodes a label. If several labels
are present in the volume, only the first label encountered is decoded and sent.
When Multiple Reading Mode is enabled, the scanner keeps on processing the image until all the labels present
are decoded. The reader then sorts the data from all the barcodes (if configured to do so) before transmitting it.
Multiple Labels per Frame
Specifies the ability of the reader to decode and transmit a set of code labels in a specific volume and in a
single frame of time. When in Multiple Labels per Frame the reader beeps and turns on the good read LED
indication for each code read in a frame.
When Multiple Labels Mode is enabled, ISBT pairing, ABC Codabar pairing, and composites are not allowed.
Multiple Labels per Frame = Disable
Multiple Labels per Frame = Enable
DEFAULT
$CSNML00(CR)
$CSNML01(CR)