HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

Enter/Exit Programming Mode 1D Code Selection

88 Programming Reference Guide

Code 39 Set Length 1

This feature specifies one of the barcode lengths for Code 39 Length Control. Length 1 is the minimum label

length if in Vari able Le ngth Mode, or the first fixed length if in Fixed Length Mode. Length includes the

barcode’s data characters only. The length can be set from 0 to 50 characters.

Table 3 provides examples for setting Length 1. See page 193 for detailed instructions on setting this feature.

Table 3. Code 39 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

00 Characters 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 39 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

Select Code 39 Set Length 1 Setting

Make a mistake? Scan the CANCEL barcode to

abort and not save the entry string. You can then start

again at the beginning.

CANCEL

$CC3L1

DEFAULT

02 = Length 1 is 2 Characters