Programming Guide HP RP9 Retail Integrated 2x20 Display HP ElitePOS 2x20 Display
© Copyright 2017, 2016 HP Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Table of Contents Chapter 1 Introduction ........................................................................... 2 1.1 Features ................................................................................................................. 2 Chapter 2 General Specifications.......................................................... 3 2.1 LCD Panel Modules ................................................................................................ 3 2.1.1 LM940 ....................................
Chapter 1 Introduction 1.1 Features The customer display for the HP RP9 (LM940) model is a Liquid-Crystal Display (LCD) which has three kinds of display patterns. 1. 20 columns and 2 lines, each column is 16 x 16 dots. 2. 10 columns and 1 line, each column is 32 x 32 dots. 3. True Graphic Mode, which is 320 x 32 dots. The customer display for the HP ElitePOS (TD620) model is a Thin-Film-Transistor Liquid-Crystal Display (TFT LCD) which has three kinds of display patterns. 1.
Chapter 2 General Specifications 2.1 LCD Panel Modules 2.1.1 LM940 ITEM STANDARD VALUE UNIT Number of dots 320 x 32 dot --- Outline dimension 150 (L) x 34.9 (W) x 6.4 mm View area 144.8 (L) x 22.44 (W) mm Active area 142.7 (L) x 19.82 (W) mm Dot size 0.446 (L) x 0.62 (W) mm Dot pitch 0.426 (L) x 0.6 (W) mm LCD type STN Negative Transmissive (In LCD production, there can be a slight color difference. HP can only guarantee the same color in the same batch.
2.2 Electricity 2.2.1 LM940 Central Control Unit CPU : MB9BF306N ROM : 512K ROM RAM : 64K SRAM Speed CPU : 80 MHz Connector 6Pin USB Power Source 5V USB Power 2.2.2 TD620 Central Control Unit CPU : LBCP1028A ROM : 128K ROM RAM : 64K SRAM Speed CPU : 80 MHz Connector 6Pin USB Power Source 5V USB Power 2.3 Overall Dimensions 2.3.1 LM940 Dimension 220 (W) x 101(H) x 69.2(D) View direction 6 o’clock Horizontal Rotation Max 355° Weight Approximately 980 grams 2.3.2 TD620 Dimension 157.
2.5 Driver Interface Interface USB 2.6 User Setting The default protocol of the virtual RS232 port is 9600 bps, non-parity, 8 data bits, 1 stop bit with DTR/DSR control. 2.6.1 Function Setting No switch, all user settings are set up by the Application Program (AP).
( III ) Codepage List FIRMWARE 1.58.
Chapter 3 Command Description 3.1 Command Set 3.1.
US : US ^ n m US @ US T h m ESC % n ESC W n s (x1 y1 x2 y2) 1F3A 1F 5E n m Set starting/ending position of macro definition Execute and quit macro 0≦(n,m)≦255 n: specifies the time interval for display of characters in units of [n* 50msec] m: specifies the interval of macro execution every [m*50msec] 1F 40 Execute self-test 1F 54 h m Display time :0≦h≦23 ; 0≦m≦59 1B 25 n Select/cancel download character set n=0, canceled ; n=1, selected 1B 57 n s (x1 y1 x2 y2) Specify/cancel the window range n=1,2,3,4 (f
* International Character Set Table Firmware 1.58.2 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 0x11 USA France Germany U.K. Denmark I Sweden Italy Spain I Japan Norway Denmark II Spain II Latin America Korea Slovenia/Croatia China Vietnam Arabia 3.1.
3.1.3 UTC Enhance Command Mode Command ESC u A..CR ESC u B..CR ESC u D..CR ESC u E..CR Hex 1B 75 41 [data x 20] 0D 1B 75 42 [data x 20] 0D 1B 75 44 [data x 45] 0D 1B 75 45 hh ‘:’ mm 0D ESC u F..CR ESC u H..CR 1B 75 46 [data x 45] 0D 1B 75 48 n m 0D ESC u 1..CR ESC RS..
3.1.
3.1.
(REMARK) * While using command “ESC Q A” or “ESC Q B”, these two commands could be used combining with terminal printer - TP 2688 or TP3688 * If using command “ESC Q A” or “ESC Q B”, others commands can’t be used except using command “CLR” or “CAN” to change operating mode * If using command “ESC Q D”, message on upper line will move continuously till receiving a new command, clearing upper line, and moving cursor to most left position on upper line * International Character Set Table Firmware 1.58.
3.1.
3.1.9 LOGIC Command Mode Command Hex ^Q ^R ^I ^H ^J ^M ^S ^T ^P 11 12 09 08 0A 0D 13 14 10 ^_ ^D n 1F 04 n Function Description Overwrite mode Vertical mode Horizontal tab Back space Line feed Carriage return Cursor on Cursor off Digital select e.g.
3.1.
* International Character Set Table Firmware 1.58.2 Hex Country 0x00 USA 0x01 France 0x02 Germany 0x03 U.K.
Chapter 4 Character Set 4.1 U.S.A. / Standard Character Set (20h ‐ 7Eh) 0 20h 1 2 3 4 5 6 7 8 9 A B C D E F ! “ # $ % & ‘ ( ) * + , - . / 30h 0 1 2 3 4 5 6 7 8 9 : ; < = > ? 40h @ A B C D E F G H I J K L M N O 50h P Q R S T U V W X Y Z [ \ ] ^ _ 60h ` a b c d e f g h i j k L m n o 70h p q r s t u v w x y z { | } ~ 4.
