HP Retail Integrated 2x20 Display Programming Guide

10
3.1.3 UTC Enhance Command Mode
Command
Hex
Function Description
ESC u A..CR
1B 75 41 [data x 20] 0D
Upper line display
ESC u B..CR
1B 75 42 [data x 20] 0D
Bottom line display
ESC u D..CR
1B 75 44 [data x 45] 0D
Upper line message scroll continuously
ESC u E..CR
1B 75 45 hh ‘:’ mm 0D
Set and display 24 hour time
0≦h ,m≦9
ESC u F..CR
1B 75 46 [data x 45] 0D
Upper line message scroll once pass
ESC u H..CR
1B 75 48 n m 0D
Change attention code
32
≦
n ,m
(Default attention code n=1Bh, m=75h)
ESC u 1..CR
1B 75 49 [data x 40] 0D
Two line display
ESC RS..CR
1B 0F 0D
Change to UTC standard mode
3.1.4 AEDEX Command Mode
Command
Hex
Function Description
! # 1..CR
21 23 31 [data x 20] 0D
Upper line display
! # 2..CR
21 23 32 [data x 20] 0D
Bottom line display
! # 4..CR
21 23 34 [data x 45] 0D
Upper line message scroll continuously
! # 5..CR
21 23 35 hh ‘:’ mm 0D
Set and display 24 hour time
0≦h ,m≦9
! # 5 CR
21 23 35 0D
Display 24 hour time
! # 6..CR
21 23 36 [data x 45] 0D
Upper line message scroll once pass
! # 8..CR
21 23 38 n m 0D
Change attention code
32
≦
n ,m
(Default attention code n=”!”, m=”#”)
! # 9..CR
21 23 39 [data x 40] 0D
Two line display
3.1.5 ADM788 Command Mode
Command
Hex
Function Description
CLR
0C
Clear display
CR
0D
Carriage return
SLE1
0E
Clear up line and move cursor to upper line left most end
SLE2
0F
Clear low line and move cursor to lower line left most end
DC0
10 n
Set period to upper line last n position
1≦n≦7
DC1
11 n
Set line blinking
n=1, upper line
n=2, lower line
DC2
12 n
Clear line blinking
n=1, upper line
n=2, lower line
SF1
1E
Clear field 1 and move cursor to field 1 fast position
SF2
1F
Clear field 2 and move cursor to field 2 fast position