User's Manual

122
Figure 112 Traps configuration
3. Select Enable SNMP Trap.
4. Click Apply to enable the SNMP trap function.
5. Click Add.
The page for adding a target host of SNMP traps appears.
Figure 113 Adding a target host of SNMP traps
6. Configure the settings for the target host as described in Table 38.
7. Click Apply.
Table 38 Configuration items
Item Descri
p
tion
Destination IP Address
Set the destination IP address.
Select the IP address type: IPv4 or IPv6, and then type the corresponding IP
address in the field according to the IP address type.