Getting Started Guide

1
Preparing for installation
The HP 1920 Gigabit Ethernet Switch Series includes models listed in Table 1.
Table 1 HP 1920 Gigabit Ethernet Switch Series models
Product code HP description Alias RMN
Non-PoE
JG920A HP 1920-8G Switch 1920-8G HNGZA-HA0008
JG923A HP 1920-16G Switch 1920-16G HNGZA-HA0011
JG924A HP 1920-24G Switch 1920-24G HNGZA-HA0012
JG927A HP 1920-48G Switch 1920-48G HNGZA-HA0015
PoE
JG921A HP 1920-8G-PoE+ (65W) Switch 1920-8G-PoE+ (65W) HNGZA-HA0009
JG922A HP 1920-8G-PoE+ (180W) Switch 1920-8G-PoE+ (180W) HNGZA-HA0010
JG925A HP 1920-24G-PoE+ (180W) Switch 1920-24G-PoE (180W) HNGZA-HA0013
JG926A HP 1920-24G-PoE+ (370W) Switch 1920-24G-PoE (370W) HNGZA-HA0014
IMPORTANT:
For regulatory identification purposes, the switches are assigned Regulatory Model Numbers (RMNs). The
RMNs should not be confused with the marketing name HP 1920, or the product codes.
Safety recommendations
To avoid any equipment damage or bodily injury, read the following safety recommendations before
installation. The recommendations do not cover every possible hazardous condition.
• To avoid damage to the electrolytic capacitor in the switch, do not store the switch without power for
more than one year.
• Before cleaning the switch, remove all power cords from the switch. Do not clean the switch with a
wet cloth or liquid.
• Do not place the switch near water or in a damp environment. Prevent water or moisture from
entering the switch chassis.
• Do not place the switch on an unstable case or desk. The switch might be severely damaged in case
of a fall.
• Ensure good ventilation of the equipment room and keep the air inlet and outlet vents of the switch
free of obstruction.
• Make sure the operating voltage is in the required range.
• To avoid electrical shocks, do not open the chassis while the switch is operating or when the switch
is just powered off.