User's Manual

274

Field Descri

tion

Member Ports All member ports.

MLD snooping configuration example

Network requirements

As shown in Figure 247, MLDv1 runs on Router A and MLDv1 snooping runs on Switch A. Router A acts

as the MLD querier.

Perform the configuration so that Host A can receive the IPv6 multicast packets destined for the IPv6

multicast group FF1E::101.

Figure 247 Network diagram

Configuration procedure

Configuring Router A

Enable IPv6 multicast routing, assign an IPv6 address to each interface, enable IPv6 PIM-DM on each

interface, and enable MLD on GigabitEthernet 1/0/1. (Details not shown.)

Configuring Switch A

1. Create VLAN 100:

a. Select Network > VLAN from the navigation tree.

b. Click the Create tab.

c. Enter 100 as the VLAN ID.

d. Click Apply.

Source

Router A Switch A

Receiver

Host A

Host B

1::1/64

GE1/0/2

GE1/0/3

MLD querier

GE1/0/1

2001::1/64

GE1/0/2

1::2/64

VLAN 100