User's Manual

487
Item Descri
p
tion
Rate Limit Enable or disable rate limit on the specified port.
Direction
Select a direction in which the rate limit is to be applied.
• Inbound—Limits the rate of packets received on the specified port.
• Outbound—Limits the rate of packets sent by the specified port.
• Both—Limits the rate of packets received and sent by the specified port.
CIR Set the committed information rate (CIR), the average traffic rate.
Please select port(s)
Specify the ports to be configured with rate limit.
Click the ports to be configured with rate limit in the port list. You can select
one or more ports.
Configuring priority mapping tables
1. Select QoS > Priority Mapping from the navigation tree.
Figure 473 Configuring priority mapping tables
2. Configure a priority mapping table as described in Table 161.
3. Click Apply.
Table 161 Configuration items
Item Descri
p
tion
Mapping Type
Select the priority mapping table to be configured:
• CoS to Queue.
• DSCP to Queue.
Input Priority Value
Set the output priority value for an input priority value.
Output Priority Value
Restore
Click Restore to display the default settings of the current priority mapping
table on the page.
To restore the priority mapping table to the default, click Apply.