User's Manual

Figure 31 Configuring global parameters for the stack on Switch A

Switch A becomes the master device.

2. Configure a stack port on Switch A:

a. In the Port Settings area on the Setup tab, select GigabitEthernet1/0/1.

b. Click Enable.

Figure 32 Configuring a stack port on Switch A

3. On Switch B, configure GigabitEthernet 1/0/2 (connected to Switch A), GigabitEthernet 1/0/1

(connected to Switch C), and GigabitEthernet 1/0/3 (connected to Switch D) as stack ports:

a. Select Stack from the navigation tree of Switch B.

b. In the Port Settings area on the Setup tab, select GigabitEthernet1/0/1, GigabitEthernet1/0/2,

and GigabitEthernet1/0/3.

c. Click Enable.