User's Manual

432
Figure 421 Secure MAC address list
2. When the maximum number of MAC addresses is reached, intrusion protection is triggered. Select
Device > Port Management from the navigation tree, and then select the Detail tab.
On the page, click the target port (GigabitEthernet 1/0/3 in this example) to view details.
Figure 422 sh
ows that the port state is inactive.
Figure 422 Displaying port state
3. Re-select GigabitEthernet 1/0/3 to refresh its data 30 seconds later.
Figure 423 shows that the port state is ac
tive.