User's Manual
69
Managing ports
You can use the port management feature to set and view the operation parameters of a Layer 2 Ethernet
port and an aggregate interface.
• For a Layer 2 Ethernet port, these operation parameters include its state, speed, duplex mode, link
type, PVID, description, MDI mode, flow control settings, MAC learning limit, and storm
suppression ratios.
• For an aggregate interface, these operation parameters include its state, link type, PVID, description,
and MAC learning limit.
Setting operation parameters for a port
1. Select Device > Port Management from the navigation tree.
2. Click the Setup tab.