User's Manual

3.5 Parking Mode

To monitor the vehicle when it is parked, you can activate Park

Recording, or Motion and Collision Detection, or Timelapse.

Before you activate Parking Mode, please install ACC cable

through professional car service shop.

Follow the steps below to change the settings for Parking Mode:

1. Press the button to enter the OSD menu.

2. Press the / button to select Parking Mode, and then

press the button for entering function menu.

3. Press the / button to configure Parking Mode (Park

Recording / Motion and Collision Detection / Timelapse/ Off),

and then press the button to complete setting.

4. Press the button to return recording screen.

Note: ACC cable is not included in the package. Please ask for more information from your

distributor.

3.5.1 Park Recording

- In normal recording, press and hold POWER key for 3

seconds, the screen will show message “Press OK key to

power off or enter Park Recording after 10 sec.” Please

wait for 10 seconds and the camcorder will enter Park

Recording automatically. The camcorder will turn off the

screen temporarily, but still in recording status. Once the

collision or vibration is detected, it will automatically trigger

emergency recording.

- To disable this function, press any key to wake up the screen,

and press again any key to resume to normal loop recording.

Note:

1. The video file taken in this mode is same as normal loop recording mode. It will be saved in

the “Video” folder. And the emergency file will be saved in the “Emergency” folder.

2. The file size is according to Record Interval setting.