HP Elite x2 1012 G1 Tablet HP Elite x2 1012 G1 Tablet with Advanced Keyboard HP Elite x2 1012 G1 Tablet with Travel Keyboard - Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for Authorized Service Provider parts
- Backup and recovery
- Computer Setup (BIOS), TPM, and HP Sure Start
- Using HP PC Hardware Diagnostics (UEFI)
- Specifications
- Power cord set requirements
- Statement of memory volatility
- Recycling
- Index
Using the kickstand
To change the angle for the display, follow these steps:
1. Hold the tablet with top edge up (the speakers are on top).
2. Slide the kickstand away from the tablet and position the kickstand at the desired angle. The kickstand
will hold at a midway point (1) of about 52 degrees or at full stopping point (2) of about 118 degrees.
To close the kickstand, push the kickstand against the bottom of the tablet until it is ush with the bottom.
10 Chapter 2 External component identication