HP Elite x2 1012 G1 Tablet HP Elite x2 1012 G1 Tablet with Advanced Keyboard HP Elite x2 1012 G1 Tablet with Travel Keyboard - Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for Authorized Service Provider parts
- Backup and recovery
- Computer Setup (BIOS), TPM, and HP Sure Start
- Using HP PC Hardware Diagnostics (UEFI)
- Specifications
- Power cord set requirements
- Statement of memory volatility
- Recycling
- Index
Connecting the tablet to the keyboard base
To connect the tablet to the keyboard base, follow these steps:
1. Insert the tablet POGO pin connector docking port into the keyboard base POGO pin docking connector.
2. Position the kickstand at the desired angle.
NOTE: If you close the kickstand, you can leave the keyboard attached and position the keyboard behind the
tablet. The keyboard keys and TouchPad are locked to prevent you from accidently typing while the keyboard
is in this position.
16 Chapter 2 External component identication