User Guide
Table Of Contents
- Welcome
- Components
- Network connections
- Connecting to a wireless network
- Using the wireless controls
- Connecting to a WLAN
- Using HP Mobile Broadband (select products only)
- Using HP Mobile Connect (select products only)
- Installing a micro SIM card (select products only)
- Using GPS (select products only)
- Using Bluetooth wireless devices (select products only)
- Sharing using NFC (select products only)
- Connecting to a wireless network
- Screen navigation
- Entertainment features
- Power management
- Shutting down (turning off) the tablet
- Setting power options
- MicroSD cards
- Security
- Protecting the tablet
- Using passwords
- Using antivirus software
- Using firewall software
- Installing critical security updates
- Using HP Client Security (select products only)
- Using HP Touchpoint Manager (select products only)
- Using an optional security cable
- Using a fingerprint reader (select products only)
- Maintenance
- Backup and recovery
- Computer Setup (BIOS), TPM, and HP Sure Start
- Using HP PC Hardware Diagnostics (UEFI)
- Specifications
- Electrostatic Discharge
- Accessibility
- Index
Using the kickstand
To change the angle for the display, follow these steps:
1. Hold the tablet with top edge up (the speakers are on top).
2. Slide the kickstand away from the tablet and position the kickstand at the desired angle. The kickstand
will hold at a midway point (1) of about 52 degrees or at full stopping point (2) of about 118 degrees.
To close the kickstand, push the kickstand against the bottom of the tablet until it is ush with the bottom.
Using the kickstand 9