User Guide
Table Of Contents
- Welcome
- Components
- Network connections
- Connecting to a wireless network
- Using the wireless controls
- Connecting to a WLAN
- Using HP Mobile Broadband (select products only)
- Using HP Mobile Connect (select products only)
- Installing a micro SIM card (select products only)
- Using GPS (select products only)
- Using Bluetooth wireless devices (select products only)
- Sharing using NFC (select products only)
- Connecting to a wireless network
- Screen navigation
- Entertainment features
- Power management
- Shutting down (turning off) the tablet
- Setting power options
- MicroSD cards
- Security
- Protecting the tablet
- Using passwords
- Using antivirus software
- Using firewall software
- Installing critical security updates
- Using HP Client Security (select products only)
- Using HP Touchpoint Manager (select products only)
- Using an optional security cable
- Using a fingerprint reader (select products only)
- Maintenance
- Backup and recovery
- Computer Setup (BIOS), TPM, and HP Sure Start
- Using HP PC Hardware Diagnostics (UEFI)
- Specifications
- Electrostatic Discharge
- Accessibility
- Index
1. Save your information and close all programs associated with the microSD card.
2. Tap the remove hardware icon in the notication area, at the far right of the taskbar. Then follow the on-
screen instructions.
3. Insert a small straightened paper clip (1) into the card tray access hole.
4. Press in gently only until the card tray is ejected.
5. Remove the tray (2) from the tablet and remove the card (3).
6. Replace the tray (4) in the tablet.
7. Press in gently on the tray until it is rmly seated.
Using the microSD card reader 37