Maintenance and Service Guide

b. Rotate the display panel onto the keyboard (1) to gain access to the display cable connection on
the back of the panel.
c. On the back of the display panel, release the adhesive strip (2) that secures the display panel cable
to the display panel, and then disconnect the cable (3).
d. Remove the display panel from the computer.
4. To remove the display hinges:
a. For each hinge, remove the two Phillips PM2.5×3.5 screws (1) and the two broadhead Phillips
PM2.5×2.5 screws (2) that secure each hinge to the display enclosure.
Component replacement procedures 81