Maintenance and Service Guide

4. Secondary hard drive: Remove the bottom cover (see Service door on page 36).
5. Lift the hard drive connector (1), and then release the hard drive cable (2) from the guide.
6. Loosen the four captive screws (3) that secure the hard drive to the computer.
7. Lift the tab and use it to remove the secondary hard drive (4).
8. If it is necessary to replace the hard drive connector adapter on a hard drive, slide the adapter (1) o of
the front end of the hard drive.
46 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts