Maintenance and Service Guide

Speakers
Description Spare part number
Anti-magnetic speaker bracket (part of the bracket kit) 848360-001
Speakers (includes cable) 848361-001
Before removing the speakers, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service door (see Service door on page 36).
5. Remove the battery (see Battery on page 39).
6. Remove the hard drives (see Hard drive on page 42).
7. Remove the SSDs (see Solid-state drives (M.2) on page 48).
8. Remove the middle frame (see Middle frame on page 58).
Remove the speakers:
1. Remove the Phillips screw (1) that secure the anti-magnetic speaker bracket to the computer.
2. Remove the bracket (2).
3. Remove the two Phillips screws (1) that secure the right speaker to the computer.
4. Remove the right speaker (2).
62 Chapter 6 Removal and replacement procedures for authorized service provider parts