HP ZBook 15u G3 Mobile Workstation HP EliteBook 850 G3 Notebook PC HP EliteBook 840 G3 Notebook PC - Maintenance and Service Guide

2. Position the computer upright with the front toward you.
3. Open the computer as far as possible.
4. Insert a screwdriver or similar thin tool into the hole beside the heat sink/fan assembly, and then press
on the back of the keyboard until it disengages from the computer (2). Rotate the top of the keyboard
upward, and then lift the keyboard up at an angle to disengage the tabs at the bottom of the keyboard.
NOTE: Cables connect the bottom of the keyboard to the system board. Make sure not to prematurely
pull the keyboard cables out of the system board connectors.
52 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts