HP ZBook 15 G3 Mobile Workstation - Maintenance and Service Guide

Solid-state drive (M.2)
Description Spare part number
1-TB, PCIe 848238-001
512-GB, SATA-3 922078-001
512-GB, PCIe, locked for EMEA 915234-001
512-GB, PCIe, Samsung, locked 917489-001
512-GB, self-encrypting drive (SED), OPAL2, SATA-3, TLC 922975-001
512-GB, PCIe, locked 927934-001
512-GB, Samsung, locked, for AMS region L07371-001
256-GB, SATA-3 922077-001
256-GB, PCIe, Samsung, locked 917488-001
256-GB, self-encrypting drive (SED), OPAL2, SATA-3, TLC 929513-001
256-GB, PCIe, locked 927935-001
256-GB, Samsung, locked 913526-001
Before removing the solid-state drive, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 32).
5. Disconnect the battery (see Battery on page 34).
Remove the solid-state drive:
1. Remove the Phillips PM2.0×3.5 screw (1) that secures the solid-state drive to the system board.
2. Remove the solid-state drive (2) by pulling the drive away from the slot at an angle.
42 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts