HP ZBook 15 G3 Mobile Workstation - Maintenance and Service Guide

1. Remove the two Phillips PM2.0×3.0 screws from the bracket atop the display connector (1), and then
remove the bracket (2).
2. Disconnect the display cable (3).
3. Disconnect the remaining cables from the system board:
(4) Fingerprint reader cable
(5) Touchpad cable
(6) RTC battery cable
(7) Speaker cable
(8) LED board cable
4. Remove the two Phillips PM2.5×7.0 screws (1) from the VGA bracket, and then remove the bracket (2).
68 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts