RAID - User Guide

4. Once the Create Volume button is clicked, you are informed that the array has been created.
Click the OK button. The array migration continues to run in the background. The computer can
be used normally while the migration continues.
5. When you are notified that the array migration is complete, close all open programs, and then
reboot the computer.
6. When the computer boots up, the operating system detects the newly-created array and
requests a reboot. Reboot the computer when prompted. After the final reboot, the RAID
migration is complete.
Migrating to Flexible data protection (Recovery)
Recovery offers more control over how data is copied from the primary drive to the recovery drive.
When the secondary hard drive is in the SATA-swappable bay of the HP Advanced Docking Station
or connected to the eSATA port of the computer (select models only), Recovery is the only RAID
option available.
NOTE: Flexible data protection is not available using the eSATA port on the docking station on
select models. On models unable to access flexible data protection on the eSATA port on the docking
station, connect using the eSATA port on the notebook.
1. Click Create, click Flexible data protection (Recovery), and then click Next.
16 Chapter 5 RAID volume setup