RAID - User Guide

3. Click Create Volume to begin the migration process.
4. Once the Create Volume button is clicked, you are informed that the array has been created.
Click the OK button. The array migration continues to run in the background. The computer can
be used normally while the migration continues.
5. When you are notified that the array migration has completed, close all open programs, and then
reboot the computer. When the computer reboots, the operating system detects the newly-
created array and requests another reboot. Reboot the computer when prompted. After the final
reboot, the RAID migration is complete.
NOTE: It is possible that during a rebuild of the RAID volume, the Intel Rapid Storage
Technology screen will display 0-GB to indicate the available storage space. However, the RAID
volume storage space size will return to its original state after completion of the rebuild
operation. The rebuild operation may take several hours depending on the size of the hard
drives.
18 Chapter 5 RAID volume setup