Instructions for replacing a memory module

900896-121 2
2. To remove the access panel, loosen the captive Phillips
screw (1), lift the rear of the access panel upward (2),
and then slide the access panel off the computer (3).
3. Locate the memory modules under the drive cage:
1. Hard drive
2. Optical drive
3. Memory modules
4. To remove the front bezel, pull the three tabs
upward (1), and then rotate the bezel off the
computer (2).
5. Remove the fan duct to access the cables connected to
the rear of the optical drive. Pull the tabs away from
each other (1), and then lift the duct off the fan sink (2).