Instructions for replacing the hard drive

900898-121 2
3. Locate the hard drive:
1. Hard drive
2. Optical drive
3. Memory modules
4. To remove the front bezel, pull the three tabs
upward (1), and then rotate the bezel off the
computer (2).
5. Remove the fan duct to access the cables connected to
the rear of the optical drive. Pull the tabs away from
each other (1), and then lift the duct off the fan sink (2).
6. To remove the optical drive, disconnect the power and
data cables from the rear of the drive (1), and then
press the green lever to disengage the drive from the
drive bay (2).
7. Slide the optical drive out of the front of the computer. 8. Disconnect the power and data cables from the back
of the hard drive. Note that a 3.5-inch drive is shown.