Instructions for replacing the hard drive

900898-121 4

Replacing the hard drive

1. To install a 2.5 inch hard drive: Orient the hard drive to

match the orientation of the old hard drive--that is, which

side is up and the position of the connector. Insert the

hard drive into the drive cage (1), and then replace the

four screws (2).

2. To replace the hard drive ca

e, insert the tabs at the

top of the cage into the slots in the side of the

computer (1), and then rotate the drive cage

downward (2).

3. Insert the cable into the clip on the drive cage (1),

and then replace the screw (2).

4. To install a 3.5 inch hard drive: Orient the hard drive

to match the orientation of the old hard drive--that is,

which side is up and the position of the connector.

Insert the hard drive into the drive cage (1), and then

replace the four screws (2).

5. Connect the data and power cables to the back of the

hard drive. Note that a 3.5-inch drive is shown.

6. To replace the optical drive, insert the drive into drive

bay in the front of the computer until it locks into place.