Instructions for replacing the hard drive

900898-121 5
7. Connect the data and power cables to the back of
the optical drive.
8. To replace the fan duct, align the duct with the fan
sink, and then push the duct down onto the fan sink
until it locks into place.
CAUTION: Be careful not to damage the optical
drive connectors.
9. To replace the front bezel, insert the tabs at the bottom
of the bezel into the slots in the front of the computer (1),
and then rotate the bezel onto the computer until it
snaps into place (2).
10. To replace the access panel, position the access panel
on the computer and slide the panel downward onto
the computer (1). Slide the access panel toward the
front of the computer until seated (2), and then tighten
the captive screw (3).
11. Plug the power cord and any additional cables into
the back of the computer.
12. Press the power button to turn on the computer.