Memory Module Replacement Instructions

900896-001 5
7. To replace the fan duct, align the duct with the fan sink,
and then push the duct down onto the fan sink until it
locks into place.
CAUTION: Be careful not to damage the optical drive
connectors.
8. To replace the front bezel, insert the tabs at the bottom
of the bezel into the slots in the front of the computer
(1), and then rotate the bezel onto the computer until it
snaps into place (2).
9. To replace the access panel, position the access panel
on the computer and slide the panel downward onto the
computer (1). Slide the access panel toward the front of
the computer until seated (2), and then tighten the
captive screw (3).
10. Plug the power cord and any additional cables into
the back of the computer.
11. Press the power button to turn on the computer.
© Copyright 2016 HP Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for
HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty.
HP shall not be liable for technical or editorial errors or omissions contained herein.
First Edition: August 2016
PRI NTER: Repl ac e thi s bo x with Pr int ed- I n (PI )
St at ement(s) as p er sp ec.
NOTE: This box is simply a placeholder. PI
St at ement(s) do n ot ha ve to fit ins id e the b ox
but sh ould be pl aced in t hi s area .