User Guide

NOTE: If you are mounting the monitor to a mounting xture instead of the stand refer to Mounting the
monitor on page 16.
Rear components
Component Function
1 USB 3.0 Downstream
Connectors (side panel)
Connects optional USB devices to the monitor.
2 Master Power Switch Turns o all power to the monitor.
NOTE: Putting the switch in the O position will yield the
lowest power state for the monitor when not in use.
3 AC Power Connector Connects the AC power cord to the monitor.
4 DisplayPort IN Connects the DisplayPort cable to the monitor.
5 DVI-D Connects the DVI-D cable to the monitor.
6 HDMI Connects an HDMI cable to the monitor.
7 DisplayPort OUT Connects a second monitor.
NOTE: A removable rubber plug covers the DisplayPort OUT
connector.
8 Audio Out Connects headphones or optional HP Speaker Bar to the
monitor.
9 USB 3.0 Upstream
Connector
Connects the USB hub cable to the monitor's USB hub connector
and to a host USB port/hub.
10 USB 3.0 Downstream
Connectors
Connects optional USB devices to the monitor.
6 Chapter 3 Setting up the monitor