User Guide
Connecting the cables
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Before connecting the cables, route the cables through the cable routing hole in the center of the stand.
3. Depending on your conguration, connect either the DisplayPort, DVI, or HDMI video cable between the
PC and the monitor.
NOTE: The video mode is determined by the video cable used. The monitor will automatically
determine which inputs have valid video signals. The inputs can be selected through the On-Screen
Display (OSD) feature by pressing one of the ve front bezel buttons to activate the buttons, and then
press the bottom Open Menu button to open the OSD. In the OSD select Video Input and choose the
desired input source.
●
For DisplayPort digital operation, connect the DisplayPort signal cable to the DisplayPort IN
connector on the rear of the monitor and the other end to the DisplayPort connector on the
computer (cable provided).
NOTE: You must connect the DisplayPort cable to the DisplayPort IN connector, not the
DisplayPort OUT connector. The monitor will not function if you connect the cable between the
DisplayPort OUT connector and the computer.
Connecting the cables 7