User Guide

5. Place the monitor panel on the mounting bracket you've installed by aligning its recess with the
mounting bracket, then sliding it down over the top of the bracket and pressing it back into place against
the bracket. The release latch on the monitor will pop up when the monitor is safely locked in place.
Mounting the monitor without using the Quick Release 2 mounting bracket
Remove the monitor stand from the panel (see Removing the monitor stand on page 16). To mount the
monitor panel directly to a mounting xture without using the HP Quick Release 2 mounting bracket, use the
four screws removed from the VESA holes on the rear of the monitor panel and install them to attach the
mounting device to the rear of the monitor panel.
Mounting the monitor 19