User Guide

Level 1 Level 2 Level 3
Back
Back
Information Current Display Mode: Display Mode
Color Space: Color Space
Serial Number: Serial Number
Firmware Revision:
Firmware Revision IDs
Last Calibration: xxxxx Hours
Backlight Hours: xxxxx Hours
Back
Factory Reset
Color management
The monitor includes both standard and user denable color space settings to support a variety of customer
uses. Most color spaces are pre-calibrated at the factory and can be recalibrated by the end user when the HP
DreamColor Calibration Solution kit is used (sold separately). Calibration includes control of the monitor’s
color gamut, RGB primaries, gamma, and luminance. The RGB Adjust color selections are not calibrated and
cannot be calibrated.
Color presets
The calibrated color space presets are dened as follows:
Color Preset Red Primary Green Primary Blue Primary White
Point
Gamma Luminance
(cd/m2)
u' v' u' v' u' v'
sRGB 0.451 0.523 0.125 0.563 0.175 0.158 D65 sRGB 0–100%
AdobeRGB 0.451 0.523 0.076 0.576 0.175 0.158 D65 2.2 0–100%
BT.709 0.451 0.523 0.125 0.563 0.175 0.158 D65 2.4 0–100%
User User User User User User User User User 0–100%
Native Panel Panel Panel Panel Panel Panel Panel 2.2 0–100%
User adjustment of luminance above or below the target luminance is possible for each color space while
maintaining the accuracy of the primaries and the white point.
The RGB Adjust color selections are not calibrated and include:
●
Warm (approximately 5000K)
●
Neutral (approximately 6500K)
●
Cool (approximately 9300K)
●
Custom (RGB) (user adjustable setting for red, green, and blue)
30 Chapter 4 Operating the monitor