User Guide
1 Product features
Features
The LCD (liquid crystal display) monitor has an active matrix, In-Plane Switching (IPS) panel. The monitor
features include:
●
61.0 cm (24-inch) diagonal viewable area display with 1920 x 1200 resolution, plus full-screen support
for lower resolutions: includes custom scaling for maximum image size while preserving original aspect
ratio
●
Wide color gamut to provide 100% coverage of both AdobeRGB and sRGB color spaces
●
Ability to accurately remap the color gamut of the monitor (within the supported color gamut of the
panel) to enable the selection of the color space and very accurately set the RGB primaries for consistent
and repeatable colors
●
Very high color and luminance stability (with typical use)
●
Calibrated color space factory presets for AdobeRGB, BT. 709, and sRGB so the monitor is ready to use
for color critical applications with minimal setup
●
Re-calibrateable color presets that allow you to re-calibrate to a standard or custom color space by
specifying the color primaries, white point, gamma, and luminance (requires the separately purchased
HP DreamColor Calibration Solution kit)
●
Option to return to Factory Calibration settings or User Calibration settings to easily restore the monitor
to the factory or user settings
●
User calibration that requires the DreamColor calibration solution kit (sold separately)
●
User adjustable color settings for customers who do not have calibration equipment
●
Four recongurable front bezel Function buttons to quickly select the most commonly used operations
●
Wide viewing angle to allow viewing from a sitting or standing position, or moving from side-to-side
●
Adjustable tilt, height, swivel, and pivot capabilities
●
Removable stand for exible monitor panel mounting solutions
●
HP Quick Release 2 to quickly install the monitor on the stand with a simple click and remove it with the
convenient sliding tab release
●
Optional thin client mounting bracket that attaches to the rear of the stand (purchased separately)
●
Easy access pull-out information card with the information needed when contacting HP support
●
Video signal inputs to support DisplayPort digital (cable provided), DVI digital (cable provided), and HDMI
digital (cable not provided)
●
DisplayPort output connector for DisplayPort multistreaming
●
Analog audio output for headphones or an optional HP speaker bar
●
USB 3.0 hub with one upstream port (cable provided) that connects to the computer and four
downstream ports that connect to USB devices
●
Plug and play capability if supported by your operating system
Features 1