HP EliteBook Folio G1 Notebook PC - Maintenance and Service Guide

Thermal solution kit
Install the thermal solution kit to address system overheating.
Description Spare part number
Thermal solution kit (includes thermal plate, three graphite sheets, and three thermal pads) 910054-001
Before installing the thermal solution kit, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 23).
5. Remove the system board (see System board on page 30).
Install the thermal solution kit:
1. Remove the thermal plate by removing the four Phillips M2.0×3.0 screws (1), and then lifting the
thermal plate o the computer (2).
Component replacement procedures 39