User's Manual

Enable the high-speed USB port for printing

This printer features a high-speed USB 2.0 port for wired USB printing. The port is located in the interface ports

area and is disabled by default. Use one of the following methods to enable the port. Once the port is enabled,

install the product software in order to print using this port.

●

Method one: Enable the high-speed USB 2.0 port from the printer control panel menus

●

Method two: Enable the high-speed USB 2.0 port from the HP Embedded Web Server (network-connected

printers only)

Method one: Enable the high-speed USB 2.0 port from the printer control panel menus

Use the control panel to enable the port.

1. From the Home screen on the printer control panel, navigate to the Settings application, and then select

the Settings icon.

2. Open the following menus

● General

● Enable Device USB

3. Select the Enabled option.

Method two: Enable the high-speed USB 2.0 port from the HP Embedded Web Server (network-

connected printers only)

Use the HP EWS to enable the port.

1. Open the HP Embedded Web Server (EWS):

NOTE: The steps vary according to the type of control panel.

1 Keypad control panel

2 Touchscreen control panel

ENWW Print using high-speed USB 2.0 port (wired) 67