Maintenance and Service Guide

NOTE: Slow, steady pressure is required when working with the pull-to-release tabs in substep b.
Pulling too fast can result in the tabs breaking and the release action being incomplete.
b. Grasp the pull-to-release tabs located in the top corners of the display panel assembly and pull them
as far as they will release.
c. Separate the top edge (3) of the display panel assembly from the display back cover.
d. Swing the top edge (1) of the display panel assembly up and forward until it rests upside down in
front of the display assembly.
e. Release the display panel cable (2), the webcam cable, and the WLAN antenna cables from
the display hinges.
Component replacement procedures 41