Maintenance and Service Guide

a. Remove the display panel assembly.
b. Remove the display hinges.
c. Remove the two Phillips M2.0×4.1 screws (1) that secure the display hinge covers to
the display hinges.
d. Remove the display hinge covers (2).
The display hinge covers are available using spare part number L93208-001.
16. If it is necessary to replace the WLAN antenna(s), follow these steps:
a. Remove the display panel assembly.
b. Remove the right display hinge.
c. Detach the antenna transceivers (1) from the display back cover. (The antenna transceivers are
attached to the display back cover with double-sided tape.)
Component replacement procedures 45