HP Easy Shell - Administrator Guide
2. Specify the RDP le path.
Adding a Citrix StoreFront connection
Follow the instructions outlined here to add a Citrix StoreFront connection.
NOTE: On the devices that connect to the StoreFront server, you must install the SSL certicates for your
StoreFront server. If no certicates exist, HP Easy Shell might fail to communicate with the server.
1. In the StoreFront panel, select the StoreFront tile.
2. Select the Select store button to use the wizard.
– or –
Enter the full path for the StoreFront URL in the Store URL box in a format similar to: https://
samplestorefrontaddress.net/citrix/thinclient. Then, go to step 6.
TIP: If you do not include http:// or https:// in the URL, it defaults to https://.
3. Enter the base path for the StoreFront URL. A base path should be entered in a format similar to the
following: https://samplestorefrontaddress.net. Then, select Next.
TIP: If you do not include http:// or https:// in the URL, it defaults to https://.
4. If prompted, enter the StoreFront Citrix credentials, and then select OK.
5. Select the StoreFront account, and then select Next.
6. Congure the settings in the connection editor as necessary.
NOTE: See the following table for a list of settings.
7. Select Save to nish adding the connection.
8. Select Apply to save your changes.
NOTE: NetScaler is supported as well. HP Easy Shell supports updating StoreFront and NetScaler
passwords after they have expired.
The following information about StoreFront connections might be helpful:
● You can edit or delete a connection by selecting the corresponding button on that connection tile.
● At the bottom of the StoreFront panel, you can set the action to take when all StoreFront connections
have ended.
● When a StoreFront session is active, you can select Disconnect session under the resource window to end
the session.
The following table describes the settings available in the StoreFront connection editor.
Table 2-5
Citrix StoreFront connection settings
Panel Setting Description
StoreFront Connection name Species a custom name to be displayed on the tile for the connection.
10 Chapter 2 Conguration