HP Easy Shell - Administrator Guide

1. Open the HP Easy Shell Conguration utility (see Obtaining and opening HP Easy Shell on page 2 for
more information).
2. Enable Kiosk mode, and congure the environment for standard users (see Creating an HP Easy Shell
conguration on page 4 for more information) and be sure to select Apply to apply the conguration.
3. If you are conguring HP Easy Shell from an administrator account, log o, and then log on as a standard
user.
If you are conguring HP Easy Shell from a standard user account and you switched to the conguration
utility using the Admin button, select Exit to return to the standard user interface.
NOTE: You can test the user experience from an administrator account, with the exception that the
Kiosk mode setting does not aect administrator accounts.
4. Be sure that the environment is congured as needed. If it is not, return to HP Easy Shell Conguration to
make additional changes.
5. The conguration can be deployed to other thin clients (see Deployment on page 14 for more
information).
Using HP Easy Shell 3