HP Easy Tools - Administrator Guide

5 Easy Deploy
NOTE: For Windows Embedded Standard 7, Easy Deploy was replaced by Easy Capture as of
version 3.0.1.1725. See Easy Capture on page 4 for more information.
Easy Deploy enables you to capture an image, deploy an image, and set security. The following tabs
are available:
●
Capture—Capture an image, settings, or a configuration.
NOTE: If capturing to a USB flash drive, the USB flash drive capacity must be larger than that
of the thin client flash drive. Images larger than 4 GB cannot be captured to a USB flash drive.
●
Deploy—Deploy an image, settings, or a configuration. You can either deploy to the thin client
you are using or to another thin client.
●
Security—Set an administrator password to a set of thin clients specified by a list of IP
addresses, one per line.
NOTE: You can only deploy the administrator password to thin clients that have the same
current password.
5