HP ThinPro 5.0 - Administrator Guide

Table E-5 root > ConnectionType > freerdp (continued)
Registry key Description
root/ConnectionType/freerdp/connections/{UUID}/label The name of the connection show in the Control Center. For
Smart Zero, this will typically be set to 'Default Connection'
and does not show in the user interface.
root/ConnectionType/freerdp/connections/{UUID}/
localPartitionRedirection
If set to 0, the storage extension for local non-USB storage
partitions—other than those used by HP ThinPro—is
disabled. If set to 1, the local non-USB storage partitions are
redirected through the storage extension in the RDP
connection.
root/ConnectionType/freerdp/connections/{UUID}/
mouseMotionEvents
When set to 0, mouse motion events will not be sent to the
server. This may prevent some user feedback such as
tooltips from functioning properly.
root/ConnectionType/freerdp/connections/{UUID}/
offScreenBitmaps
When set to 0, off-screen bitmaps will be disabled. This
might slightly increase performance but will cause blocks of
the screen to be updated asynchronously, causing screen
transitions to update non-uniformly.
root/ConnectionType/freerdp/connections/{UUID}/password The default password to supply to the remote host during
login. This value will be stored encrypted. Generally this
setting is used for kiosk style applications where a generic
password is used for login.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagDesktopComposition
If set to 1, allows desktop composition, such as translucent
borders, if supported by the server. Turning it off may
improve performance on low-bandwith connections.
Generally, this affects only RemoteFX.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagFontSmoothing
If set to 1, allows font smoothing when supported by the
server and enabled. Turning it off can improve performance
on low-bandwith connections.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagNoCursorSettings
If set to 1, disables cursor blinking, which can improve
performance on low-bandwidth RDP connections.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagNoCursorShadow
If set to 1, turns off mouse cursor shadows, which can
improve performance on low-bandwidth RDP connections.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagNoMenuAnimations
If set to 1, turns off menu animations, which can improve
performance on low-bandwidth RDP connections.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagNoTheming
If set to 1, turns off user interface themes, which can improve
performance on low-bandwidth RDP connections.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagNoWallpaper
If set to 1, turns off the desktop wallpaper, which can
improve performance on low-bandwidth RDP connections.
root/ConnectionType/freerdp/connections/{UUID}/
perfFlagNoWindowDrag
If set to 1, turns off full-content window drag, which can
improve performance on low-bandwidth RDP connections.
The window outline will be used instead.
root/ConnectionType/freerdp/connections/{UUID}/port The port number to use when contacting the RDP server. By
default, this is set to 3389 and will rarely need to be
changed.
root/ConnectionType/freerdp/connections/{UUID}/
portMapping
If set to 1, the following local serial and parallel ports will be
redirected to the remote host: ttyS0, ttyS1, ttyS2, ttyS3,
ttyUSB0, lp0.
root/ConnectionType/freerdp/connections/{UUID}/
printerMapping
If set to 1, the CUPS printer redirection plugin will be
activated, causing all printers defined locally through CUPS
to be redirected to the remote host.
88 Appendix E Registry keys