HP ThinPro 5.0 - Administrator Guide

Table E-5 root > ConnectionType > freerdp (continued)
Registry key Description
root/ConnectionType/freerdp/connections/{UUID}/
rdpEncryption
If set to 1, standard RDP encryption will be used to encrypt
all data between the client and server.
root/ConnectionType/freerdp/connections/{UUID}/remoteApp Specifies the name of an available apllication to run in
remoteApp, or RAIL, mode.
root/ConnectionType/freerdp/connections/{UUID}/remoteFx Use RemoteFX, if available.
root/ConnectionType/freerdp/connections/{UUID}/
seamlessWindow
If set to 1, the window decorations are disabled. This might
be desirable in a multi-monitor configuration to allow the
connection to be set to the size of the primary monitor.
root/ConnectionType/freerdp/connections/{UUID}/
securityLevel
root/ConnectionType/freerdp/connections/{UUID}/
sendHostname
The supplied text will be sent to the remote host as the client
hostname. If left blank, the system hostname will be sent to
the hostname.
NOTE: The general settings key 'root/ConnectionType/
freerdp/coreSettings/sendHostname' must be set to
'hostname' for this key to be used.
root/ConnectionType/freerdp/connections/{UUID}/smartcard If set to 1, local smart card authentication will be allowed on
the remote host. This will disable the Network Level
Authentication (NLA).
root/ConnectionType/freerdp/connections/{UUID}/sound If set to 0, audio redirection is disabled. If set to 1, the
playback and recording devices are redirected to the RDP
connection. If set to 2, USB audio devices are redirected as
specified in the USB Manager.
HP recommends setting this value to 1 so that USB audio
devices are not redirected to the host. This will improve
audio quality and ensure that client audio that is redirected
via other methods (such as Multimedia Redirection) matches
local audio settings.
root/ConnectionType/freerdp/connections/{UUID}/startMode If set to the default focus and the connection is already
started, the connection will be given focus. Otherwise, an
error will be returned stating that the connection is already
started.
root/ConnectionType/freerdp/connections/{UUID}/
timeoutError
The number of milliseconds to wait after losing connection
with the server before presenting an error dialog box and
closing the connection. Disabled if 0.
root/ConnectionType/freerdp/connections/{UUID}/
timeoutRecovery
The number of milliseconds to wait after losing connection
for networking to recover without trying a forced
reconnection.
root/ConnectionType/freerdp/connections/{UUID}/
timeoutWarning
The number of milliseconds to wait after losing connection
with the server before warning the user that connection has
been lost. Disabled if 0.
root/ConnectionType/freerdp/connections/{UUID}/
usbMiscRedirection
If set to 0, the redirection is disabled for all USB devices
other than those handled by sound, printerMapping,
portMapping, usbStorageRedirection, and
localPartitionRedirection. If set to 2, all other USB devices
are redirected in the RDP connection according to the USB
Manager.
root/ConnectionType/freerdp/connections/{UUID}/
usbStorageRedirection
If set to
0, the storage extension for the USB storage devices
is disabled. If set to 1, the USB storage devices are
root > ConnectionType 89